manualshive.com logo in svg

STIEBEL ELTRON Heat pumps, Technical Manual

Share
Download
STIEBEL ELTRON Heat pumps Technical Manual Download Page 138

138

www.stiebel-eltron.CoM

A

t a glance

  For fully automatic heating 

water heating up to +60 °C flow 
temperature

  inlet temperature range for the 

wPF

 

brine temp. –5 °C to +20 °C

  Comprises all components 

required for its function and 
safety

  sound-insulated construction and 

sound attenuating materials in 
the casing components

  Corrosion-protected through zinc-

plated or stove enamelled casing 
components

  For installation in rooms free 

from the risk of frost (no external 
installation)

  Central control of the heating 

system and safety functions 
through the integral heat pump 
manager

  test symbol of independent test 

bodies (see type plate)

  Contains HCFC and CFC-free 

r410A refrigerant

  Can be operated with heating 

return water up to +75 °C (dual-
mode operation)

  Passive cooling possible via 

external heat exchanger

Appliance description

brine | water heat pump for internal 
installation with integral heating 
control unit (wPM), circulation pump, 
safety valve, diverter valve for DHw 
heating and electric booster heater. 
the heat pump unit is equipped with 
an hermetically sealed compressor, 
a soft starter, a condenser, an 
evaporator, safety equipment such 
as a high/low pressure limiter, and 
frost protection. the heat pump is 
filled with the HCFC and CFC-free 
refrigerant r410A. 

Function

environmental energy is extracted 
by the heat exchanger on the heat 
source side (evaporator). Any energy 
extracted is transferred, together with 
the energy drawn by the compressor 
drive, to the heating water by a heat 
exchanger on the heating water 
side (condenser). subject to the 
heating load, the heating water can 
be heated to b15 °C and 
+60 °C. the correct and professional 
implementation of the heat source 
system is a must for a perfect 
operation. For this, observe the heat 
pump cooling load.

brInE | watEr HEat pUmpS wpf 5/7/10/13/16

Safety and quality

Summary of Contents for Heat pumps





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands