Standard Horizon CP590, Owner'S Manual

Page: 84 / 134

CP590 Page 85
can be changed to the following selections:
· MAX SPD = Max Speed
· SOG = Speed Over Ground
· COG = Course Over Ground
· DST = Distance to Destination
1
· BRG = Bearing to Destination
1
· XTE = Cross Track Error
· TTG = Time To Go
· STR = Steering
· HDG = Heading from Electronic Compass
· DTP = Depth
· SPD = Speed
· ALT = Altitude
· AWS = Apparent Wind Speed
· AWD = Apparent Wind Direction
· TWS = True Wind Speed
· TWD = True Wind Direction
· HDOP = Horizontal Dilution of Precision
· VDOP = Vertical Dilution of Precision
· Temp = Water Temperature
· TLOG = Trip Log
· Date = Current Date
· Time = Current Time
· VMG = Velocity Made Good
· ETA = Estimated Time of Arrival
· Scale = Chart Scale
· GSP Status = Shows GPS Fix Status (WAAS, 3D, 2D, ...)
NOTE
1
When the GENERAL window is selected and the GPS chart plotter is in Home Mode, the BRG will
show - - -, unless the GPS chart plotter is navigating to a point. When in Cursor Mode, the BRG
shows the Bearing from the ship’s position to the cursor location.
To select the desired field, follow the procedure:
1. Press and hold
[MENU] until a field is highlighted (it will be shown in a yellow frame).
2. Move the ShuttlePoint knob to the desired data field (the yellow frame is moved to the
desired data field) and press [ENT] . The popup window will be shown.
3. Move the ShuttlePoint knob up/down or left/right to choose the desired setting and press
[ENT] .
4. Press [CLR] to store and exit the editing mode.
NOTE
Data window field on the NAVIGATION, HIGHWAY, GPS STATUS, and NMEA pages may be
customized in the above manner.