manualshive.com logo in svg

Standard Horizon CP590, Owner'S Manual

The Standard Horizon CP590 is a top-notch marine chartplotter with advanced navigation capabilities. Maximize your experience with this high-performance device by accessing the comprehensive Owner's Manual, available for free download at manualshive.com. This manual equips you with all the necessary information for efficient and optimized usage of the CP590.

Share
Download
background image

CP590

Page 79

11. USER C-CARD

The optional User C-CARD is used to back up Marks, Routes, and Tracks stored in your
GPS Chart Plotter's memory. In the USA the User C-CARD is available directly from
Jeppesen Marine at 800/424-2627. The User C-CARD is similar to a backup disk used with
a PC, in case you have to clear the RAM to resolve an issue or load new software, or if you
would like to transfer Waypoint, Track and Route information from one STANDARD
HORIZON GPS Chart Plotter to another.

11.0 USER C-CARD MENU

This optional card is similar to using a floppy disk or memory stick on a PC to backup your
files or to transfer the information that you have stored to a friends GPS Chart Plotter. The
information shown below will assist you to transfer the User Points, Routes and Track
history to the optional User C-CARD.
To open the User C-CARD page:
1. Press 

[MENU]

, move the ShuttlePoint knob to highlight 

USER POINTS

 and press 

[ENT]

.

2. Move the ShuttlePoint knob to highlight 

USER C-CARD

 and press 

[ENT]

.

Figure 11.0 - User C-CARD Menu

11.0.0 Formatting the optional User C-CARD

1. Press 

[MENU]

, move the ShuttlePoint knob to highlight 

USER POINTS

 and press 

[ENT]

.

2. Move the ShuttlePoint knob to highlight 

USER C-CARD

 and press 

[ENT]

.

3. Move the ShuttlePoint knob to highlight 

FORMAT

 and press 

[ENT]

.

4. A popup Warning window will to confirm you want to format the User C-CARD.
5. Select 

YES

 and press 

[ENT]

 to confirm (select 

NO

 otherwise). The format of User

C-CARD must be done before using a new User C-CARD: this operation prepares the
User C-CARD to receive and store information.

NOTE

Formatting permanently erases all files previously saved on the User C-CARD.

Summary of Contents for CP590







































































































































Reviews:

No comments

Related manuals for CP590

Garmin GWS 10 Marine Wind Sensor Important Safety Information preview
GWS 10 Marine Wind Sensor
Brand: Garmin Pages: 48

Brands by name

Popular brands

Load more brands