Page 69
3.
Lift the side cover up and remove it from the frame.
4.
Install the new side cover by aligning the cover hooks with the frame
pins and tightening the wing nuts. Reinstall the top cover.
DRIVE SHAFT ASSEMBLY
1.
Remove all the covers.
2.
From the left side, remove the lower Poly-V belt.
3.
Remove the snap ring from the drive shaft, back the lower Poly-V
pulley set screw out and slide the pulley off the drive shaft (see Figure
21).
4.
Disconnect the left and right spring from their respective spring
hangars. Disengage the step chain from the drive sprockets.
5.
Remove the drive sprocket, thrust washers, thrust bearings, and
spacers from the drive shaft (see Figure 21).
6.
From the right side, remove the snap ring, washers, bearings, drive
sprocket from the drive shaft and slide the shaft out from the frame.
7.
Install the new shaft and reassemble the machine.
HANDLE ASSEMBLY
1.
Remove the two bolts from the handle.
2.
Remove the handle from the leg assembly.
PARTS REMOVAL AND REPLACEMENT
TO REDUCE THE RISK OF EYE INJURY, WEAR EYE PROTECTION WHEN REMOVING
SNAP RINGS.
WARNING
!
Summary of Contents for FREERUNNER 5600
