Page 6
A
.
Assemble the Machine:
1.
Cut each tywrap that secures the console handlebar to the rear
support bars (see Figure 3). Remove the foam protection from each
side of the handlebar. Lift the handlebar out from under the pedals.
Set the handlebar with console aside. Remove the step from under
the pedals and set the step aside.
Figure 3: Tywrap Location
2.
Remove the shrink wrap from the pedal, and lift the power supply box,
owner’s manual, and hardware bag off the pedal. Set the parts aside.
3.
Remove the top covers. Use the fastener removal tool from the
hardware bag to remove the top cover rivets. Disconnect the Polar
®
heart rate receiver under the right top cover from the upper Polar
heart rate cable (see Figure 4).
4.
Have an assistant support the console handlebar. Stand on the right
side of the machine and connect the lower Polar heart rate cable from
the handlebar to the upper Polar heart rate cable in the frame.
Connect the upper Polar heart rate cable to the heart rate receiver
and reinstall the top cover.
5.
Stand on the left side of the machine and connect the upper main
cable coming out from the handlebar to the lower main cable from the
frame. Next, connect the upper brake cable from the handlebar to the
INSTALLATION INSTRUCTIONS
Summary of Contents for FREERUNNER 5600
