manualshive.com logo in svg

Stairmaster FREERUNNER 5600, Owner'S Manual

Share
Download
Stairmaster FREERUNNER 5600 Owner'S Manual Download Page 10

Page 1

W

HEN

 

USING

 

ELECTRICAL

 

EQUIPMENT

, 

ALWAYS

 

FOLLOW

 

THESE

 

BASIC

 

PRECAUTIONS

:

IMPORTANT SAFETY INSTRUCTIONS

This symbol appearing throughout this manual means
Attention!  Be Alert!  Your safety is involved.

The following definitions apply to the words “Danger” and “Warning”
found throughout this manual:

  

   

DANGER 

— 

Used to call attention to IMMEDIATE hazards

which, if not avoided, will result in immediate, serious personal injury or
loss of life.

  

   

WARNING 

— 

Used to call attention to POTENTIAL hazards that

could result in personal injury or loss of life.

 READ ALL INSTRUCTIONS BEFORE USING THE MACHINE.

To reduce the risk of electrical shock,
always unplug the external power supply
from the  AC wall outlet before cleaning,
maintaining, or repairing.

To reduce the risk of burns, fire, electric
shock, or injury to persons:

1.

Close supervision is necessary whenever the machine is used by or
near children, invalids, or disabled persons.

2.

Do not operate or remove the back cover while the machine is
plugged into a power source. Keep your hands away from all moving
parts.

SAFETY GUIDELINES

!

DANGER

!

WARNING

!

Summary of Contents for FREERUNNER 5600
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands