Page 63
3.
Remove the four mounting screws and grounding screw from the
frame. Remove the power connector cable from the frame.
4.
Install the new cable, secure the grounding screw, and reinstall the
side cover.
Stride Sensor Cable
1.
Remove the left side cover.
2.
Unplug the cable from the stride sensor board. Remove it from the
power control board.
3.
Install the new cable and reinstall the side cover.
CHAINS
Upper Heel Link Chains
1.
Remove the pedal and the appropriate side cover.
2.
Remove the power control board (left side only).
3.
Loosen the heel link turnbuckle.
4.
Remove the heel link flange bearing.
5.
Unhook the extension spring from the spring hanger.
6.
Remove the jam nut and washer from the heel link shaft (see
Figure 23).
7.
Support the upper heel link sprocket and remove the heel link from
the heel link bearing block.
8.
Disconnect the master links from the upper heel link chains and install
the new chains.
PARTS REMOVAL AND REPLACEMENT
Summary of Contents for FREERUNNER 5600
