Page 35
INITIAL SERVICE
Upon receiving your machine, use a soft, clean towel to wipe off the dust that
may have accumulated during shipping. Your new machine will require minor as-
sembly. Refer to the “Installation Instructions” section for details.
PREVENTIVE MAINTENANCE
A schedule for the recommended preventive maintenance is shown in Table 4.
This schedule assumes moderate to heavy usage in a commercial health club
environment. Always unplug the power prior to working on the machine. Refer to
the “Parts Removal and Replacement” section for all disassembly and assembly
instructions.
Cleaning
1.
DO NOT USE GLASS CLEANERS OR ANY OTHER HOUSEHOLD
CLEANER ON THE CONSOLE. Clean the console daily with a
water-dampened cloth and wipe dry after cleaning.
2.
Clean the exterior of the machine daily using soap and water or a
diluted household cleaner such as Fantastic
®
.
3.
Thoroughly clean the entire machine, including the interior, at least
once a week.
Inspection
1.
Inspect the exposed frame for any rust, bubbling, or paint chips during
the weekly cleaning. The salt in perspiration can damage any
unpainted surfaces. Repair the damaged area with touch-up paint
(PN 22181).
2.
Remove the left side cover, and inspect the belts for undue wear and/
or fraying during quarterly lubrication. Adjust the alternator belt tension
if necessary.
MAINTENANCE INSTRUCTIONS
Summary of Contents for FREERUNNER 5600
