Page 7
lower brake cable from the frame. Tuck any excess slack in the cables
up inside the handlebar.
6.
Attach the console handlebar to the frame. To prevent the rivnuts (see
Figure 4) from spinning in the frame, hold the rivnuts with pliers while
securing the mounting screws to the frame.
Figure 4: Cable Locations
7.
Have an assistant help you slide the machine off the shipping pallet
and onto the floor. Use the transport wheels (see Figure 1) to roll the
machine into the desired location.
8.
Remove the packing material from the console, handlebar, and step.
Place the step inside the rear supports and insert a mounting screw
and a washer into each step hole. Tighten each screw.
INSTALLATION INSTRUCTIONS
Summary of Contents for FREERUNNER 5600
