Page 67
5.
Pull the chain away from the drive sprocket and install the new chain.
6.
Reinstall the spring and verify that the spring is seated in the spring
hanger groove.
Note: If you are having difficulty removing the left spring,
remove the power control board for more accessibility.
CONSOLE
1.
Remove the four mounting knobs and lock washers from the back of
the console.
2.
Lift up the console and disconnect the main cable and the left and right
contact heart rate cables (if applicable).
CONSOLE HANDLEBAR
1.
Remove the console and the side covers.
2.
Disconnect the upper main cable from the lower main cable and the
lower brake cable.
3.
Remove the main cable and the Polar heart rate cable from the
console handlebar.
4.
Have an assistant support the handlebar. Remove the bolts and
washers from each end of the handlebar. Gently pull the handlebar
away from the machine.
5.
Install the new handlebar and connect all cables. Ensure that the
cables are not pinched between the frame and the handlebar, and are
not in the way of moving parts.
6.
Reinstall the console and the covers.
PARTS REMOVAL AND REPLACEMENT
Summary of Contents for FREERUNNER 5600
