SSINVERTER SSI700, User Manual, Page: 6 / 148

SSI700 User Manual
www.ssinverter.info
4.11 Use of AO Terminals
4.12 Use of Serial Communication
4.13 Password Setting
4.14 Parameter Saving and Default Setting Restoring 20
21
21
22
Chapter 5 Function Code Table
5 Standard Function Parameters
1
Chapter 6 Description of Function Codes
Group P0: Basic Parameters
Group P1: Motor 1 Parameters
Group P2: Vector Control Parameters
Group P3: V/F Control Parameters
Group P4: Input Terminals
Group P5: Output Terminals
Group P6: Start/Stop Control
Group P7: Operation Panel and Display
Group P8: Auxiliary Functions
Group P9: Fault and Protection
Group 10: Process Control PID Function
Group 11: Swing Frequency, Fixed Length and Count
Group 12: Multi-Reference and Simple PLC Function
Group 13: Point-point Communication
Group 16: User Password
Group 17: Torque Control and Restricting Parameters
1
9
10
13
15
23
27
32
37
47
53
58
60
63
63
64
Chapter 7 EMC
7.1 Definition of Terms
7.2 Introduction to EMC Standard
7.3 Selection of Peripheral EMC Devices
7.4 Shielded Cable
7.5 Solutions to Common EMC Interference Problems
1
1
2
3
5
Chapter 8 Selection and Dimensions
8.1 Electrical Specifications of the SSI700
8.2 Physical Appearance and Overall Dimensions of the SSI700
8.3 Physical Dimensions of External Operation Panel
8.4 Selection of Braking Resistor
1
1
2
3
Chapter 9 Maintenance and Troubleshooting
9.1 Routine Repair and Maintenance of the SSI700
9.2 Warranty Agreement
9.3 Faults and Solutions
9.4 Common Faults and Solutions
1
2
2
5