SSINVERTER SSI700, User Manual, Page: 47 / 148

SSI700 User Manual Function Code
www.ssinverter.info
Property
Default Setting Range Parameter Name
Function
Code
Group P4: Input Terminals
★ 1
0: No function
1: Forward RUN (FWD)
2: Reverse RUN (REV)
3: Three-line control
4: Forward JOG (FJOG)
5: Reverse JOG (RJOG)
6: Terminal UP
7: Terminal DOWN
8: Coast to stop
9: Fault reset (RESET)
10: RUN pause
11: Normally open (NO) input of
external fault
12: Multi-reference terminal 1
13: Multi-reference terminal 2
14: Multi-reference terminal 3
15: Multi-reference terminal 4
16: Terminal 1 for acceleration/
deceleration time selection 1
17: Terminal 2 for acceleration/
deceleration time selection 2
18:Frequency source switchover
19: UP and DOWN setting clear
(terminal, operation panel)
20: Command source switchover
terminal 1
21:Acceleration/Deceleration
prohibited
22: PID pause
23: PLC status reset
24: Swing Frequency pause
25: Counter input
26: Counter reset
27: Length count input
28: Length reset
29: Torque control prohibited
30: Pulse input (enabled only for
DI5)
31:Reserved
32: Immediate DC braking
33: Normally closed (NC) input
of external fault
34: Frequency modification
forbidden
35: Reverse PID action direction
36: External STOP terminal 1
37: Command source switchover
terminal 2
38: PID integral pause
39: Switchover between main
frequency source A and preset
frequency
40: Switchover between auxiliary
frequency source B and preset
frequency
41: reserved
42: reserved
43: PID parameter switchover
44: reserved
DI1 function selection P4-00
★
2 DI2 function selection P4-01
★
9 DI3 function selection P4-02
★ 12 DI4 function selection P4-03
★
13 DI5 function selection P4-04
-
- Reserved P4-05
- - Reserved P4-06
-
- Reserved P4-07
-
- Reserved P4-08