SSINVERTER SSI700, User Manual, Page: 56 / 148

SSI700 User Manual Function Code
www.ssinverter.info
Property
Default Setting Range Parameter Name
Function
Code
Group 9: Fault and Protection
● -
11: Motor overload (OL1)
12: EEPROM read-write
fault(ED)
13: External equipment fault(EF)
14: Communication fault(CE)
15: Contactor fault(RL)
16: Current detection fault(CC)
17: Motor auto-tuning fault(ER)
18: No fault
19: Accumulative running time
Reached(OT)
20: AC drive hardware fault(EH)
21: Short circuit to ground(GF)
22: Motor over-speed(OS)
23: Motor overheat(OH2)
24: PID feedback lost during
Running(PD)
25: Accumulative power-on time
Reached(UT)
26: Off Load(LL)
27: Too large speed deviation
(DEV)
28: Power output phase loss(LF)
29: Initial position fault
30: Power output phase loss
2nd fault type P9-15
● - 3rd (latest) fault type P9-16
●
- -
Frequency upon 3rd
fault
P9-17
●
- - Current upon 3rd fault P9-18
●
- -
Bus voltage upon 3rd
fault
P9-19
●
- - DI status upon 3rd fault P9-20
●
- -
Output terminal status
upon 3rd fault
P9-21
● - -
AC drive status upon
3rd fault
P9-22
● - -
Power-on time upon 3rd
fault
P9-23
●
- -
Running time upon 3rd
fault
P9-24
-
-
-
reserved P9-25
-
-
-
reserved P9-26
● - -
Frequency upon 2nd
fault
P9-27
● - - Current upon 2nd fault P9-28
● - -
Bus voltage upon 2nd
fault
P9-29
●
- - DI status upon 2nd fault P9-30
●
- -
Output terminal status
upon 2nd fault
P9-31
●
- -
AC drive status upon
2rd fault
P9-32
● - -
Power-on time upon 2rd
fault
P9-33
●
- -
Running time upon 2rd
fault
P9-34
● - -
Frequency upon 2nd
fault
P9-37