SSINVERTER SSI700, User Manual, Page: 53 / 148

SSI700 User Manual Function Code
www.ssinverter.info
Property
Default Setting Range Parameter Name
Function
Code
Group P7: Operation Panel and Display
☆
1.0000 0.0001–6.5000
Load speed display
coefficient
P7-06
● -- 0.0–100.0°C
Heatsink temperature of
inverter module
P7-07
● -- --
Temporary software
version
P7-08
●
-- 0–65535 h
Accumulative running
time
P7-09
●
-- -- Product number P7-10
●
-- -- Software version P7-11
☆
1
0: 0 decimal place
1: 1 decimal place
2: 2 decimal places
3: 3 decimal places
Number of decimal
places for load speed
display
P7-12
●
0 h 0–65535 h
Accumulative power-on
time
P7-13
● -- 0–65535 kWh
Accumulative power
consumption
P7-14
Property
Default Setting Range Parameter Name
Function
Code
Group P8: Auxiliary Functions
☆
2.00
Hz
0.00 Hz to maximum frequency JOG running frequency P8-00
☆
20.0s 0.0–6500.0s JOG acceleration time P8-01
☆ 20.0s 0.0–6500.0s JOG deceleration time P8-02
☆
Model
dependent
0.0–6500.0s Acceleration time 2 P8-03
☆
Model
dependent
0.0–6500.0s Deceleration time 2 P8-04
☆
Model
dependent
0.0–6500.0s Acceleration time 3 P8-05
☆
Model
dependent
0.0–6500.0s Deceleration time 3 P8-06
☆
Model
dependent
0.0–6500.0s Acceleration time 4 P8-07
☆
Model
dependent
0.0–6500.0s Deceleration time 4 P8-08
☆
0.00Hz 0.00 Hz to maximum frequency Jump frequency 1 P8-09
☆
0.00Hz 0.00 Hz to maximum frequency Jump frequency 2 P8-10
☆
0.00Hz 0.00 Hz to maximum frequency
Frequency jump
amplitude
P8-11
☆ 0.0s 0.0–3000.0s
Forward/Reverse
rotation dead-zone time
P8-12
☆ 0
0: Enabled
1: Disabled
Reverse control P8-13
☆ 0
0: Run at frequency lower limit
1: Stop
2: Run at zero speed Running mode when set
frequency lower than
frequency lower limit
P8-14
☆ 0.00Hz 0.00–10.00 Hz Droop control P8-15
☆
0h threshold 0–65000
Accumulative power-on
time
P8-16
☆ 0h threshold 0–65000
Accumulative running
time
P8-17
☆
0
0: No
1: Yes
Startup protection P8-18
☆
50.00
Hz
0.00 Hz to maximum frequency
Frequency detection
value (BRAKE control 1)
P8-19