SSINVERTER SSI700, User Manual, Page: 124 / 148

SSI700 User Manual Description of Function Codes
www.ssinverter.info
Figure 6-31 Reaching the set count value and designated count value
Group 12: Multi-Reference and Simple PLC Function
The SSI700 multi-reference has many functions. Besides multi-speed, it can be used as
the setting source of the V/F separated voltage source and setting source of process PID.
In addition, the multi-reference is relative value.
The simple PLC function is different from the SSI700 user programmable function. Simple
PLC can only complete simple combination of multi-reference, while the user
programmable function is more practical.
Property
Default Setting Range Parameter Name
Function
Code
Group 12: Multi-Reference and Simple PLC Function
☆ 0.0% -100.0%~100.0% Reference 0 12-00
☆ 0.0% -100.0%~100.0% Reference 1 12-01
☆
0.0% -100.0%~100.0% Reference 2 12-02
☆ 0.0% -100.0%~100.0% Reference 3 12-03
☆ 0.0% -100.0%~100.0% Reference 4 12-04
☆
0.0% -100.0%~100.0% Reference 5 12-05
☆ 0.0% -100.0%~100.0% Reference 6 12-06
☆
0.0% -100.0%~100.0% Reference 7 12-07
☆
0.0% -100.0%~100.0% Reference 8 12-08
☆ 0.0% -100.0%~100.0% Reference 9 12-09
☆
0.0% -100.0%~100.0% Reference 10 12-10
☆
0.0% -100.0%~100.0% Reference 11 12-11
☆ 0.0% -100.0%~100.0% Reference 12 12-12
☆
0.0% -100.0%~100.0% Reference 13 12-13
☆
0.0% -100.0%~100.0% Reference 14 12-14
☆ 0.0% -100.0%~100.0% Reference 15 12-15
Multi-reference can be the setting source of frequency, V/F separated voltage and
process PID. The multi-reference is relative value and ranges from -100.0% to 100.0%.
As frequency source, it is a percentage relative to the maximum frequency. As V/F
separated voltage source, it is a percentage relative to the rated motor voltage. As
process PID setting source, it does not require conversion.
Multi-reference can be switched over based on different states of DI terminals. For details,
see the descriptions of group P4.
Property
Default Setting Range Parameter Name
Function
Code
Group 12: Multi-Reference and Simple PLC Function
☆
0
0: Stop after the AC drive runs one cycle
1: Keep final values after the AC drive
runs one cycle
2: Repeat after the AC drive runs one
cycle
Simple PLC
running mode
12-16