SSINVERTER SSI700, User Manual, Page: 106 / 148

SSI700 User Manual Description of Function Codes
www.ssinverter.info
Figure 6-20 Acceleration/deceleration time switchover
During acceleration, if the running frequency is smaller than the value of P8-25,
acceleration time 2 is selected. If the running frequency is larger than the value of P8-25,
acceleration time 1 is selected.
During deceleration, if the running frequency is larger than the value of P8-26,
deceleration time1 is selected. If the running frequency is smaller than the value of P8-26,
deceleration time 2 is selected.
Property
Default Setting Range Parameter Name
Function
Code
Group P8: Auxiliary Functions
☆
0
0: Disabled
1: Enabled
Terminal JOG preferred P8-27
It is used to set whether terminal JOG is preferred.
If terminal JOG is preferred, the AC drive switches to terminal JOG running state when
there is a terminal JOG command during the running process of the AC drive.
Property
Default Setting Range Parameter Name
Function
Code
Group P8: Auxiliary Functions
☆
50.00
Hz
0.00 Hz to maximum frequency
Frequency detection
value (BRAKE control 2)
P8-28
☆ 5.0%
0.0%–100.0% (BRAKE control
hysteresis 2)
Frequency detection
hysteresis (BRAKE
control hysteresis 2)
P8-29
The frequency detection function is the same as BRAKE control 1 function. For details,
refer to the descriptions of P8-19 and P8-20.