SSINVERTER SSI700, User Manual, Page: 5 / 148

SSI700 User Manual
www.ssinverter.info
Product Checking
Upon unpacking, check:
• Whether the nameplate model and AC drive ratings are consistent with your
order. The box contains the AC drive, certificate of conformity, user manual and
warranty card.
• Whether the AC drive is damaged during transportation. If you find any
omission or damage, contact Ssinverter or your supplier immediately.
First-time Use
For the users who use this product for the first time, read the manual carefully. If in doubt
concerning some functions or performances, contact the technical support personnel of
Ssinverter to ensure correct use.
CE Mark
The CE mark on the declares that the AC drive complies with the European low voltage
directive (LVD) and EMC directive.
The SSI700 series AC drive complies with the following LVD and EMC directives and
standards:
The SSI700 series AC drive complies with the requirements of standard IEC/EN 61800-3
on the condition of correct installation and use by following the instructions in chapter 7.
Contents
Preface
1
Introduction 2
Chapter 1 Safety Information and Precautions
1.1 Safety Information
1.2 General Precautions
1
3
Chapter 2 Product Information
2.1 Designation Rules and Nameplate of the SSI700
2.2 Components of the SSI700
2.3 Technical Specifications
2.4 Peripheral Electrical Devices and System Configuration
1
1
1
3
Chapter 3 Mechanical and Electrical Installation
3.1 Mechanical Installation
3.2 Electrical Installation
1
2
Chapter 4 Operation, Display and Application Examples
4.1 Operation Panel
4.2 Viewing and Modifying Function Codes
4.3 Definition and Operation of the Multifunction Key (APP)
4.4 Viewing Status Parameters
4.5 Starting or Stopping the AC Drive
4.6 Setting the Running Frequency
4.7 Setting and Auto-tuning of Motor Parameters
4.8 Use of DI Terminals
4.9 Use of DO Terminals
4.10 Use of AI Terminals
1
2
3
3
6
11
17
19
20
20