Printing
élance
Vital Signs Monitor Operations Manual
Page 16-2
16.2 Recorder Settings
When the recorder option is installed, a "Recorder" option appears on the main Setup
enu. Selecting this option brings up the following menu:
m
The Waveform 1 setting cont
strip chart recordings.
rols which waveform is shown in the top channel of the
veform is selected for display, the strip chart recording will have only one
aveform.
When the Alarm Recording value is set to HR, a strip chart recording is initiated
whenever a HR alarm occurs.
When the Alarm Recording value is set to ALL, a strip chart recording is initiated
whenever any alarm occurs.
The Recording Time setting controls the amount of time represented on strip chart
recordings.
he Recording Delay setting controls the amount of time delay represented on strip
hart recordings (i.e., how much of the printed strip represents time prior to the event
d the recording, whether a key press or an alarm).
The Waveform 2 setting controls which waveform is shown in the bottom channel of
the strip chart recordings. If this setting value is OFF, or if it is set to ECG2 but only
one ECG wa
w
T
c
that initiate
