SVP08-0/1/2/3 - Code: 3529.0231.01
Rev. F
dated 02/07/2015
Arc. 66-I
PT
0715
MV
0715
MC
0715
Service
Phone (+39) 0445.595.111
7
1.3
Warranty conditions
The warranty conditions are stated in the contract of sale and as such have been
accepted by the Customer on confirmation of the order.
1.4
Graphic conventions
Text in
boldface
is used to indicate important information.
Reference to figures and tables are made via a boldface number indicating the
figure or table itself (e.g.
Fig. 1
or
Table 1
) and, where required, a letter or number,
preceded by the abbreviation
ref.
, to identify the component in question within the
figure (e.g.
ref. A Fig.1
or
ref. 1 Fig 1
).
In order to direct the attention of the user to the correct and safe use of the machine,
the Manual also uses the following symbols:
Remark
The Manufacturer reserves the right to make available at any time any
further information deemed necessary to improving the operation and
safety of the machine. All such information (modifications and
addendums) must be considered an integral part of the Manual.
The Manufacturer also reserves the right to make any modifications to the
machine itself that may be deemed suitable for any reason, without
updating the Manual, unless the said modifications affect the operation of
the machine.
Remark
Indicates an especially important note, instruction or precaution.
Warning!
Indicates an operation or situation which constitutes a hazard for the
machine.
Danger
Indicates an operation or situation which constitutes a hazard for the
health and safety of the user.
Summary of Contents for SVP08-0
Page 2: ......
