SVP08-0/1/2/3 - Code: 3529.0231.01
Rev. F
dated 02/07/2015
Arc. 66-III
PT
0715
MV
0715
MC
0715
Service
Phone (+39) 0445.595.111
21
3.1.3
Positioning
Before positioning the machine, check that:
z
the floor on which the machine is to be positioned is even and flat;
z
the distance between the machine and the power supply point is as short as
possible to prevent the cable becoming a hazardous obstacle to free movement;
z
the area in which the machine is to be operated is adequately illuminated.
The machine must be positioned on the floor at the point specified for its
installation, as shown in
“3.1.2 Handling” on page 19
.
The machine must be lowered onto the floor as slowly as possible to prevent
damage to either the machine or the floor itself.
With the exception of the front of the machine which is used by the operator and
requires greater clearance, leave a space of at least 50 cm around the sides of the
machine for access during maintenance and cleaning, thus ensuring the level of
hygiene required.
Once the machine has been placed in its operating position, adjust its stabiliser foot
(ref. 14 Fig. 4
on page 23
)
in order to minimise the motion of the machine while
operating.
3.1.4
Subsequent handling
If the machine is to be moved at a later date, proceed as follows:
1) slacken off the stabiliser foot
(ref. 14 Fig. 4)
;
2) move the machine by pushing it on its wheels.
Line manual
If the machine will be included as component of a line, please see the man-
ual of said line and follow the instructions you find.
Danger
Given the considerable mass of the machine, make sure before pushing it
that no-one is standing in the area through and into which it is to be moved.
Summary of Contents for SVP08-0
Page 2: ......
