Sottoriva SVP08-0, Instruction Manual

Page: 12 / 79

Rev. F
dated 02/07/2015
SVP08-0/1/2/3 - Code: 3529.0231.01
10
Service
Phone (+39) 0445.595.111
PT 0715
MV 0715
MC 0715
Arc. 66-I
1.6 General precautions
All safety regulations given below must be rigorously observed by the machine’s
users.
If so requested, the Manufacturer’s technicians are available to train the user’s staff
in the application of the information given in this Manual while the machine is being
commissioned; the Customer is responsible for identifying his staff members for
such training and for verifying the successful outcome of the training in terms of
their job descriptions.
The diagrams annexed to this Manual are for use exclusively for reactive
maintenance and inspections.
Remark
The machine quoted in this instructions manual is suitable, according to
law, to foods processing, at the time of shipment from the manufacturing
Company; this suitability can be considered valid in time just if the
machine will be daily well cleaned, if the maintenance and the control of
this machine will be correctly done, replacing immediately every single
piece that can get in contact with the food (dough, flour, water, etc.) and
that seem to be adultered, ruined or not more suitable for a correct and
healthy use. The Company does not assume any responsabilities for a
deterioration caused by an incorrect and/or by a lack of cleaning and/or of
maintenance of the produced machines.
Prohibition!
It is prohibited to use the said diagrams to modify the machine in any way
.
Any proposed modifications must be approved directly by the
Manufacturer, with a full technical specification of the machine and the
reasons for the proposal; should the proposal be approved, it may be
implemented only by the Manufacturer or persons authorised to do so by
himself.
Danger
Unauthorised tampering with or replacement of any part of the machine,
and the use of any accessories, tools or consumables other than those
recommended by the Manufacturer, may constitute a hazard and as such
void the Manufacturer’s liability, whether penal or civil.
Supervisor
Supervisors must ensure that all users have fully understood the contents of this
Manual and the meanings of the symbols located on the machine itself.