Sony DVCAM DSR-60, Service Manual

Page: 33 / 324

1-23
DSR-80/80P/60/60P
44
Chapter 4 Menu Settings
Chapter 4
Menu Settings
Menu contents (Continued)
Menu Contents
DISPLAY CONTROL [Display]: Settings related to
indications on the monitor and the unit Description of settings
∗
TIME DATA & STATUS [>> Time&STA]: Time data and
operating mode indications
TIME DATA & UB [>> Time&UB]: Time data selected using
the COUNTER SELECT button, and user bit data. (When
user bit data is selected using the COUNTER SELECT
button, user bit data and time code are output.)
TIME DATA & CNT [>> Time&CNT]: Time data selected
using the COUNTER SELECT button, and CNT value.
(When CNT is selected using the COUNTER SELECT
button, CNT value and time code are output.)
TIME DATA ONLY [>> Time]: Only time data
REC DATE & TIME [>> REC Date]: The time data selected
with the COUNTER SELECT button is shown on the time
counter display, and the date and time of recording are
shown on the monitor screen.
DISPLAY INFO [> DISP info]: Select information
superimposed on output from the VIDEO OUT 2 (SUPER)
connector to the monitor.
CHARA. TYPE [> Chara type]: Set the type of characters in
text superimposed on output from the VIDEO OUT 2
(SUPER) connector to the monitor.
Make the following settings while watching the monitor
screen.
∗
WHITE (WITH BKGD) [>> White]: White characters on black
background
BLACK (WITH BKGD) [>> Black]: Black characters on white
background
WHITE/OUTLINE [>> W/outline]: White characters with black
outline
BLACK/OUTLINE [>> B/outline]: Black characters with white
outline
Press the MENU button to confirm the setting and return to
the level 1 of the setup menu.
SUB STATUS [> Sub status]: Select supplementary status
information superimposed on output from the VIDEO OUT
2 (SUPER) connector to the monitor.
∗
OFF [>> OFF]: Nothing of supplementary status information.
EDIT PRESET [>> Edit Pre]: Indications of the editing mode
settings made from the connected editing controller.
PB FORMAT [>> Format]: Indication of the recording format
which was used for the tape being played back.
TC MODE [>> TC mode]: Indications of the operating mode
of internal time code generator.
ALL [>> ALL]: All of the above-mentioned items of
supplementary status information.
For details of supplementary status information displayed on
the monitor when a setting other than “OFF” is selected, see
“Displaying Supplementary Status Information” (page 55).
Make the following settings while watching the monitor
screen.
∗
WHITE [WITH BKGD] [>> White]: White characters on black
background
BLACK [WITH BKGD] [>> Black]: Black characters on white
background
WHITE/OUTLINE [>> W/outline]: White characters with black
outline
BLACK/OUTLINE [>> B/outline]: Black characters with white
outline
Press the MENU button to confirm the setting and return to
the level 1 of the setup menu.
MENU DISPLAY [> Menu DISP]: Set the type of characters in
menu text superimposed on output from the VIDEO OUT 2
(SUPER) connector to the monitor.
PEAK HOLD [> Peak hold]: Set the peak hold time for audio
level meter.
1.5 SEC [>> 1.5 SEC] to *OFF [>> OFF]: Set the time from
zero (OFF) to 1.5 seconds in steps of 0.1 second.
(Continued)
Chapter 4 Menu Settings
45
Chapter 4
Menu Settings
Menu contents (Continued)
DISPLAY CONTROL [Display]: Settings related to
indications on the monitor and the unit Description of settings
OVER DISP HOLD [> Hold OVER]: Determine whether or not
to hold the OVER indication display on the audio level
meter once the indication lights.
∗
OFF [>> OFF]: Do not hold the OVER indication display.
ON [>> ON (HOLD)]: Hold the OVER indication display.
Note
With “ON” selected, once the display is held it will remain held
unless you change the setting to “OFF”.
BRIGHTNESS [> Brightness]: Set the brightness of front
panel indicators.
Set brightness as a percentage of the maximum.
∗
100% [>> 100%]
66% [>> 66%]
33% [>> 33%]
ALARM [> ALARM]: Determine whether alarm messages are
issued or not.
∗
ON [>> ON]: Alarm messages are issued.
OFF [>> OFF]: Alarm messages are not issued.
REF. ALARM [> REF ALARM]: Determine whether alarm
messages related to reference video signal are issued or
not.
ON [>> ON]: Alarm messages are issued.
∗
ON (LIMITED) [>> ON (Limit)]: Alarm messages are issued
only during recording mode, EE mode, and while editing.
OFF [>> OFF]: Alarm messages are not issued.
TIME CODE [Time code]: Settings related to the time code
generator Description of settings
TC MODE [> TC MODE]: Determine whether to use internal
time code (generated by the internal time code generator)
or external time code.
∗
INT PRESET [>> INT]: Use internal time code.
EXT REGEN [>> EXT]: Use external time code.
Notes
• To be able to input an LTC signal from external equipment, it
is necessary to install the optional DSBK-130/130P Time
Code Input/Output Board in this unit.
• When the selected input mode is “QSDI” (the QSDI indicator
is lit in the INPUT MODE display), setting “TC MODE” under
the TIME CODE menu item to “EXT REGEN” causes the
internal time code generator to automatically synchronize
with the external time code input to the unit via the QSDI
interface.
RUN MODE [> RUN mode]: Select the time code generator’s
advancement (RUN) mode.
∗
FREE RUN [>> FREE RUN]: Time code generator keeps
running.
REC RUN [>> REC RUN]: Time code generator only runs
while recording.
Note
Set to “FREE RUN” when carrying out editing with an editing
controller. With the “REC RUN” setting, editing and other
operations will not be carried out correctly.
(Only on DSR-80)
DF MODE [> DF mode]: Select whether the time code
generator and time counter operate in drop frame mode or
non-drop frame mode.
Normally select drop frame mode, to keep in sync with real
time. The non-drop frame mode is useful for example
when using computer graphics, and working on a frame
count basis.
∗
ON (DF) [>> ON (DF)]: Drop frame mode
OFF (NDF) [>> OFF (NDF)]: Non-drop frame mode
UB BINARY GP. [> UB Binary Gp]: Select the user bit
binary group flag of the time code generator
Note
When the TC MODE menu item is set to EXT REGEN, the
user-bit binary group flag setting follows the setting on the
time code input to this unit.
∗
000: NOT SPECIFIED [>> 000]: Character set not specified
001: ISO CHARACTER [>> 001]: 8-bit characters
conforming to ISO 646 and ISO 2022
010: UNASSIGNED-1 [>> 010]: Undefined
011: UNASSIGNED-2 [>> 011]: Undefined
100: UNASSIGNED-3 [>> 100]: Undefined
101: PAGE/LINE [>> 101]: Mutliplex
110: UNASSIGNED-4 [>> 110]: Undefined
111: UNASSIGNED-5 [>> 111]: Undefined
(Continued)