Sony DVCAM DSR-60, Service Manual

Page: 30 / 324

1-20
DSR-80/80P/60/60P
Dubbing Signals in QSDI Format
Chapter 3 Convenient Functions for Editing Operation
38
Chapter 3 Convenient Functions for Editing Operation
In addition to straightforward tape dubbing, you can
also use this unit to dub automatically from the
beginning of the tape to the end, through an QSDI
interface.
When a tape recorded on a DSR-1/1P Digital
Videocassette Recorder or DSR-130/130P Digital
Camcorder is dubbed, the ClipLink log data held in the
cassette memory is also copied.
Notes
• Use a tape which is recorded in the DVCAM format.
(A tape recorded in DV format cannot be used as a
source tape for QSDI dubbing.)
• Regardless of the audio recording mode setting of
this unit, dubbing is performed with the original
audio recording mode unchanged (two-channel mode
(48 kHz) or four-channel mode (32 kHz)).
• Approximately the last 2 minutes of the tape may not
be copied because of differences in tape lengths. (If
an Index Picture is recorded in this portion, it may
also not be copied.)
• A continuous recorded section of approximately 5
seconds is required before the recording start point. It
is recommended to record beforehand color bars or a
similar signal at the start point of the source tape to
be dubbed on this unit.
To carry out QSDI dubbing, this unit must be
connected to the REMOTE and QSDI IN/OUT
connectors on the DSR-85/85P/80/80P/60/60P.
For details of the connections and switch settings, see the
section “Connections for QSDI Dubbing.” (Page 64)
1
Press the MENU button on the menu control panel.
Setup menu
SYSTEM MENU
SETUP MENU
AUTO FUNCTION
HOURS METER
2
Press the
≥
button to select “AUTO FUNCTION”.
Auto func
SYSTEM MENU
SETUP MENU
AUTO FUNCTION
HOURS METER
3
Press the ÷ button.
This displays the items in the level 1 of the auto
mode execution menu.
QSDI DUB
AUTO FUNCTION MENU
QSDI DUBBING
TC INSERT
4
Press the
÷
button to display the menu level 2 for
the item “QSDI DUBBING”, and select the
dubbing data with the
≥ button.
Example: Selecting “A/V/TC/CM”
>A/V/TC/CM
AUTO FUNCTION MENU
QSDI DUBBING
A/V
A/V/TC
A/V/TC/CM
Dubbing Signals in QSDI Format — QSDI Dubbing
Function
7
3,4,5
2,4
1,9
SYNC PHASE SC PHASE MENU
MONITOR SELECT
RESET(NO)
SET(YES)
CH-
1/2 CH-
3/4 CH-
1/3 CH-
2/4
MIX
Time counter display
Monitor screen
Time counter display
Monitor screen
Time counter display
Monitor screen
Time counter display
Monitor screen
Chapter 3 Convenient Functions for Editing Operation
Chapter 3 Convenient Functions for Editing Operation
39
5
Press the
÷
button.
The following message appears.
Set tape! QSDI DUBBING
(A/V/TC/CM)
INSERT RECORD TAPE IN
THIS VTR AND SOURCE
TAPE IN THE PLAYER VTR.
ABORT:MENU KEY
6
Insert the source tape in the player, and the
recording tape in this unit.
A message to confirm the dubbing operation
appears.
Start dub? QSDI DUBBING
(A/V/TC/CM)
START QSDI DUBBING?
START:YES KEY
ABORT:MENU KEY
To cancel the dubbing operation
Press the MENU button.
7
Press the SET (YES) button.
The tape is automatically wound back to the
beginning, and dubbing starts.
Executing
QSDI DUBBING
(A/V/TC/CM)
EXECUTING.
XXXXXXXXXXXXXXXXXXXXXXXX
TCR 00:00:00:00
UBR 00:00:00:00
ABORT:MENU KEY
To end the dubbing operation while it is in
progress
Press the STOP button.
When the dubbing is completed, message
“COMPLETED” appears on the monitor screen
and in the time counter display.
The source tape and recording tape are both
automatically rewound to the beginning, and the
cassettes ejected. When the cassette is ejected, this
unit returns to the state in step
5.
8
To continue by dubbing another tape, repeat steps
6 and 7 .
9
When the dubbing is completed, press the MENU
button to exit the menu.
If the following message appears in step 6 for
an A/V/TC/CM dubbing operation
CM capacity!
QSDI DUBBING
(A/V/TC/CM)
CM MEMORY STORAGE
CAPACITY OF THE RECORD
TAPE IS TOO SMALL.
ABORT:MENU KEY
When carrying out A/V/TC/CM dubbing, the contents
of the cassette memory of the cassettes inserted in both
this unit and the player are checked.
If the cassette memory capacity of the source tape is
larger than the cassette memory capacity of the
recording tape, the above message appears.
In this case, replace the recording tape by a tape with a
larger cassette memory capacity.
Time counter display
Monitor screen
Time counter display
Monitor screen
Time counter display
Monitor screen
Time counter display
Monitor screen