Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
16(113)
2.2.4
Battery Installation
If this part is being replaced, a new part should be used in the place of the old part when the
following steps are being performed.
Tools needed to perform the following steps:
None
Step-by-Step Instructions
1.
With the label side of the battery oriented away from
the phone, insert the end of the battery with
connection pads into the end of the battery cavity
nearest the system connector.
2.
While pushing the battery towards the system
connector, simultaneously press the other end of the
battery down into the battery cavity.
All of the sections of the base reassembly following this section must be performed in sequential
order to reassemble the base portion of the phone.
