Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
5(113)
Step-by-Step Instructions
3.
Once dislodged, lift the battery cover away from the
phone.
2.1.2
Battery Removal
All of the sections of the Base Disassembly preceding this section must be performed in sequential
order before the disassembly steps listed below can be performed.
Tools needed to perform the following steps:
•
Pry Tool
NOTE!
Whenever the phrase “pry tool” is used, a nylon pointer, an orangewood stick, or a front
opening tool may be used, depending on the user’s preference.
Step-by-Step Instructions
NOTE! Do not tap the phone against a hard surface
in an attempt to get the battery out. Damage
to the phone may result!
1.
At the end of the battery closest to the hinge, catch
the flat end of a pry tool on the accessible portion of
the battery that is adjacent to the speaker port.
2.
Using the pry tool, push the battery towards the
system connector while simultaneously lifting the
end of the battery. The end being lifted should come
free from the battery cavity.
