Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
106(113)
Step-by-Step Instructions
NOTE!
Make sure there is no dust, debris, or finger
prints on the two displays of the LCD
assembly before proceeding.
6.
Orient the LCD assembly so that the large display is
towards the inner flip cover and so that the end of the
LCD assembly with flex film wrapped over it is
towards the hinge wrapping portion of the inner flip
cover.
7.
Lift the main flex film out of the way and insert the
end of the LCD assembly with flex film wrapped
over it into the LCD alignment features on the inner
surface of inner flip cover.
8.
Lift the camera module’s flex film out of the way
and rotate the LCD assembly down onto the inner
flip cover so that the LCD assembly is seated within
its four alignment features on the inner flip cover.
9.
Plug the LCD connector on the main flex film into
the corresponding connector on the LCD assembly.
