Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
68(113)
Step-by-Step Instructions
6.
Slide the edge of the camera flex film under the
catch adjacent to the display window and press the
camera flex film down onto its alignment peg.
7.
Apply pressure to the flex film around the receiver
opening using the flat end of a pry tool so that the
camera module’s flex film will bond to the inner flip
cover.
NOTE! Make sure that the main flex film
connector’s black retaining bar is rotated
into a vertical orientation before trying to
insert the camera module’s mating flex film.
8.
Carefully slide the flex film connection of the
camera module into the slot in the adjacent edge of
it mating connector on the main flex film until the
two tabs on each side of the flex connection are
butted against the edge of the connector.
