Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
30(113)
3.2.3
Style-Up Flip Cover Installation
If this part is being replaced, a new part should be used in the place of the old part when
performing the installation procedure.
Tools needed to perform the following steps:
None
Step-by-Step Instructions
Note! If the old style-up cover is being reused,
inspect the two side latches to verify that they
are not broken. If either of the latches is
damaged to the point that they will not
function, use a new style-up cover.
1.
Locate the two angled tabs along the end of the
style-up cover near the camera ring cut out.
2.
Insert the two angled tabs in the corresponding
notches in the end of the flip assembly and rotate the
style-up cover onto the flip portion of the phone.
3.
Press the style-up cover onto the outer flip cover
until the style-up cover is completely snapped into
place.
