Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
99(113)
4.35
Main Flex Film
4.35.1
Main Flex Film Removal
•
Perform sections 2.1.1 - 2.1.4 of the Base Disassembly Procedure.
•
Perform the Antenna Cover Removal Procedure.
•
Perform sections 3.1.1 - 3.1.2 of the Flip Disassembly Procedure.
•
Perform the Hinge Disassembly Procedure
Tools needed to perform the following steps:
•
Pry Tool
NOTE!
Whenever the phrase “pry tool” is used, a nylon pointer, an orange stick, or a front opening
tool may be used, depending on the user’s preference.
Step-by-Step Instructions
1.
Locate the camera module’s connection to the main
flex film.
2.
Disconnect the camera module’s flex film from its
mating connector on the main flex film by rotating
the black retaining bar of the connector towards the
camera module’s flex film into a vertical position
using a pry tool.
3.
Once the black retaining bar of the connector has
been rotated up into a vertical position, pull the
camera connection portion of the main flex film
assembly directly away from the camera flex film to
disconnect the camera module.
