Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
17(113)
2.2.5
Battery Cover Installation
Tools needed to perform the following steps:
None
If this part is being replaced, a new part should be used in the place of the old part when the
following steps are being performed.
Step-by-Step Instructions
1.
Place the battery cover over the battery so that the
tips at the top of the battery cover are above the
screw holes in the outer base cover that are on each
side of the speaker port.
2.
Slide the battery cover towards the hinge until the
battery cover snaps into place.
