Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
110(113)
Step-by-Step Instructions
12.
Slide the edge of the camera flex film under the
catch adjacent to the display window and press the
camera flex film down onto its alignment peg.
13.
Apply pressure to the flex film around the receiver
port using the flat end of a pry tool so that the
camera module’s flex film will bond to the inner flip
cover.
14.
Locate the magnet and remove it from its slot in the
old inner flip cover using tweezers.
NOTE! When handling the magnet, avoid
contaminating the adhesive film that is on
one side of the magnet.
15.
Locate the magnet’s slot on the new inner flip cover
that is adjacent to the left side screw boss at the
hinge end.
