Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
73(113)
4.24.2
Bluetooth Antenna Installation
If this part is being replaced, a new part should be used in the place of the old part when
performing the following steps.
Tools needed to perform the following steps:
*
Style 2A ESD tweezers
NOTE! A “ * ” beside a tool listed above indicates that the tool is not specifically called out in the
following instructions, but an operator may find it helpful to use that tool when performing some
steps of the following procedure.
Step-by-Step Instructions
1.
With the inner surface of the outer base cover
oriented towards you, locate the area just below the
side volume key opening in which the Bluetooth
antenna mounts.
2.
Obtain a Bluetooth antenna and place it into the
outer base cover so that the three tabs are up towards
the volume key opening and the long leg portion of
the antenna is inserted in its slot in the outer base
cover.
NOTE! The Bluetooth antenna is correctly
positioned if a standoff is protruding up
between the smallest two tabs of the
Bluetooth antenna
.
•
Perform sections 2.2.3 - 2.2.5 the Flip Reassembly procedure.
