Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
99(128)
Step-by-Step Instructions
4.
Work the portion of the display flex film that contains
the LCD connector down onto the display carrier so
that the two carrier alignment pins protrude through
their corresponding holes in the display flex film
assembly.
5.
Insert the top edge of the LCD into the display
carrier’s LCD cavity.
6.
While holding the loose portion of the display flex
film away from the display carrier and the top edge of
the LCD in place, slide the LCD’s flex film through
the slot at the bottom of the display carrier’s LCD
cavity and through the opening in the display flex
film until the bottom edge of the LCD assembly is
seated in the LCD cavity.
