Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
10(128)
Step-by-Step Instructions
13.
Select one of the cable assemblies and lift it out of its
holder on the circuit board.
NOTE! Do not attempt to unplug the cable
assemblies by pulling on the mass of cables.
14.
At the board connection of the cable being
disconnected, use the tip of a pair of style 2A
tweezers to unplug the cable connection from the
board. There are two locations that the connector
must be alternately pulled at to disconnect the cable
from the connector on the circuit board. The two
pulling locations are labelled location 1 and location
2.
15.
Repeat the previous two steps to disconnect the other
cable/board connection.
16.
Once the cable assemblies are disconnected, the
outer base cover assembly is free from the rest of the
phone.