Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
78(128)
Step-by-Step Instructions
2.
Using tweezers, place a new liquid intrusion
indicator over the square pad on the display flex film
assembly as shown.
NOTE! Do not use your finger to apply pressure to
the liquid intrusion indicator. Using a finger
to apply pressure may cause partial
activation of the indicator.
3.
Using the flat end of a pry tool, apply gentle pressure
to the liquid intrusion indicator to ensure a good
adhesive bond to display flex film assembly.
•
Perform sections 3.2.1 - 3.2.4 the Flip Reassembly procedure.
•
Perform sections 2.2.2 - 2.2.4 the Base Reassembly procedure.