Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
105(128)
Step-by-Step Instructions
5.
Rotate the portion of the display flex film that was
just detached so that it is planar with the rest of the
display flex film as shown.
6.
Using a pry tool, detach the portion of the display flex
film that contains the cable connections from the
display carrier.
7.
While holding the loose portion of the display flex
film away from the display carrier, dislodge the LCD
assembly’s flex film from its connector on the display
flex film.
8.
Push the LCD assembly’s flex film through its slot in
the display carrier until the sides of the LCD
assembly are accessible enough so that the LCD
assembly can be gripped along its sides.
9.
Pull the LCD assembly free from display carrier.
