Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
54(128)
4.9
Rear Speaker Module
4.9.1
Rear Speaker Module Removal
•
Perform sections 2.1.1 - 2.1.4 of the Base Disassembly Procedure
Tools needed:
None
Step-by-Step Instructions
1.
Locate the rear speaker module and lift it from the
outer base cover.
4.9.2
Rear Speaker Module Installation
If this part is being replaced, a new part should be used in the place of the old part when the
following steps are being performed.
Tools needed:
None
Step-by-Step Instructions
W600 series only:
If a new rear speaker module in being installed in a
W600 series phone, obtain an RF absorber, remove
its adhesive protection, and install it on the new rear
speaker module in the location shown.
1.
Orient the rear speaker module relative to the interior
surface of the outer base cover so that the speaker
cloth on the speaker module is towards the outer
base cover’s rear speaker grill.