Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
116(128)
4.40
Style-Up Cover
The removal and installation of this part is covered in the flip disassembly and reassembly
procedures. To remove this part, perform section 3.1.2 of the flip disassembly. To install this
part, perform section 3.2.3 of the flip reassembly. If this part is being replaced, a new part should
be used in the place of the old part when performing the reassembly instructions.
4.41
Inner Flip Cover
The removal and installation of this part is covered in the flip disassembly and reassembly
procedures. To remove this part, perform sections 2.1.1 - 2.1.3 of the base disassembly and then
perform sections 3.1.1 – 3.1.4 of the flip disassembly. To install this part, perform sections 3.2.1
- 3.2.4 of the flip reassembly and then perform sections 2.2.2 - 2.2.4 of the base reassembly. If
this part is being replaced, a new part should be used in the place of the old part when performing
the reassembly instructions. Using a new inner flip cover requires that the power key, the camera
key, the volume key, and the music player key be transferred from the old inner flip cover to the
new one before performing the reassembly procedure. If there is any question as to how to
transfer any of the keys that have to be moved, refer to the section for the specific key in
question.
4.42
Camera Key
4.42.1
Camera Key Removal
Tools needed:
None
•
Perform sections 2.1.1 - 2.1.3 of the Base Disassembly Procedure
•
Perform sections 3.1.1 - 3.1.4 of the Flip Disassembly Procedure
Step-by-Step Instructions
NOTE! The camera key and the power key fall out very
easily and may have fallen out of place during
the removal of the display carrier assembly.
1.
Orient the inner flip cover so that its inner surface is
towards you and locate the camera key.
