Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
82(128)
Step-by-Step Instructions
NOTE! The cable assembly with the color mark
connects to the display flex film connection
that
is not
adjacent to the microphone.
6.
Select the cable you are going to connect and orient
the connector end of the cable so that the side of the
connector with the two notches is oriented away
from the flex film.
NOTE! Do NOT attempt to plug the cable
assemblies in by using their mass of wires to
push the cable connection into its mating
connector on the flex film. Damage to the
cable assembly most likely will result.
7.
Position the end of the cable assembly adjacent to its
corresponding connection slot on the flex film so
that all the connection needs is to be pressed
together.
8.
Using the tip of a pair of style 2A tweezers, work the
end of the cable into its mating connector. There are
two locations that the connection on the end of the
cable must be alternately pushed at to get the cable
connection completely seated into its connector. The
two pushing locations are labeled location 1 and
location 2.
9.
Repeat the previous three steps to connect the other
cable/flex film connection.
