36
Accessories -
Description and connections
TX
RX
1 2 1 2 3 5
Yellow label (BUS)
3 4 3 4
X X
l
safety instructions
The correct operation of the cells must be checked every 6 months. To do this, when the gate
is closing, block one cell with your hand.
the gate should stop and open again.
Check the correct alignment of the
cells:
- If the receiver cell indicator does not
light up, adjust the alignment of the
cell (RX) using a shim. Check again.
- If the receiver cell indicator lights up
continuously (correct alignment), refit
the receiver cell (RX) cover.
RX
TX
1 2
1 2 3 5
10
to check the cell alignment, the transmitter cell cover must be fitted but not the
receiver cell cover.
f you want to install cells after learning the gate travel, you must:
- clear all the settings (see page 31)
- wire the cells
- reprogram the system (see page 24).
1 2
TX
7
1 2 3 5
RX
9
8
11
TX
RX
11a
11b
Summary of Contents for SGA 6000
