STOP
STOP
26
operation
STOP
STOP
<0,5s
>0,5s
n
operation in sequential mode
All the programmed 2- or 4-button remote controls have the same mode of operation.
Successive presses of the same control button will lead to the following movements of the gate:
open, stop, Close, stop, open etc.
l
Automatic opening
l
Pedestrian opening or full opening (see page 30 to activate this mode)
The gate is
opened automatically
by
pressing the remote control.
Close
the gate by pressing the button
again.
stop
the gate by pressing the button
again.
STOP
STOP
The gate is
fully opened by pressing and
holding the button
on the remote control.
The gate is
partially opened
(motor M1) to
allow pedestrian access
by briefly pressing
the button
on the remote control.
The gate is
closed by pressing the button
again
(briefly pressing or pressing and
holding).
Summary of Contents for SGA 6000
