13
English
Preparing and drilling gateposts
1
Carry dimension B over and trace a vertical
baseline (AM) onto the gateposts.
take
care
to
follow
the
recommendations
in
the
instructions provided with the chemical
sealants when determining the drilling
method and diameters.
o
Drilling the gateposts.
o
Marking the AM and AH baselines.
5
7
8
1
Using a small-diameter (4 or 5 mm)
concrete drill bit, pre-drill 4 holes for filling
with chemical sealants into each gatepost,
in the positions marked on the template.
Finish drilling the 4 holes using a concrete
drill bit whose diameter corresponds to
the chemical sealants.orrespondant aux
scellements chimiques.
2
Trace the horizontal line (AH) onto the
post, halfway up the bracket.
2
100
Position the template at the intersection
of baselines AM and AH.
1
self-check before the next step
Have you properly aligned the AM and AH baselines on the
template and gatepost?
Summary of Contents for SGA 6000
