30
Advanced parameter setting
30
n
Activating totAL + PEDEstRIAn mode
n
Activating AUto CLosE mode (
recommended in case of solar power supply
)
The AUTO CLOSE mode can only be activated if cells were installed and recognised during
the gate travel learning process (see pages 35 and 36).
Press the right-hand button.
The TOTAL+PEDESTRIAN indicator lights up
continuously, then flashes.
2
Press the right-hand
button.
The AUTO CLOSE
indicator lights up
continuously, then flashes.
3
Press the left-hand
button once.
The AUTO
CLOSE indicator
flashes.
2
Access the settings
menu (see page
29).
1
Access the
settings menu
(see page 29).
1
To switch to TOTAL mode only, proceed in the same way; the TOTAL+PEDESTRIAN indicator
goes off then flashes.
To switch to SEQUENTIAL mode only, proceed in the same way; the AUTO CLOSE indicator
goes off then flashes.
When the parameters have been set, the parameter indicators stay on or off depending
on the settings configured.
Summary of Contents for SGA 6000
