14
Installing the motors
2
n
steps :
o
Selecting the motors
For this step, the upper parts of the motors’ casings must be removed using a coin.
Place the motor which includes the electronic control unit on the gatepost where the power
supply is located.
o
Applying the sealants.
For dependability, SOMFY advises that you fasten the motor using a chemical sealant.
o
Selecting the motors.
o
Applying the sealants.
o
Installing the motors.
Position the motor on the gatepost
and check that the mounting holes are
perfectly aligned with the holes drilled in
the gateposts.
1
Remove the motor. Place the 4 chemical
sealants and the threaded rods into the
holes drilled in the posts.
Wait for the chemical sealants to fully
harden.
2
Summary of Contents for SGA 6000
