8
Preliminary operations
l
stops on the gate
Stops must be set firmly in the ground so
as to limit the opening and closing travel
the leaves.
The location of these stops is determined
by the leaves’ opening angle (< or = to
120°).
The two leaves may have different opening
angles.
l
types of gates able to be motorised
Your SGA can be used with any type of gate, provided its structure is sufficiently sturdy.
Brackets
n
Points to be checked before installing
l
Checking your gate
Your gate is in good condition: It will open and close normally without being forced.
It remains horizontal as it is swinging open/closed. Opens inward.
Renfort
Patte de
fixation
l
Brackets located on the gate
The fastening lugs for the motor drive’s
arms must be mounted on the horizontal
brackets of the leaves, at about 1/3 of the
height of the gate.
If there are no such brackets, use backing
plates approx. 4 mm thick.
Fastening
lug
Bracket
Summary of Contents for SGA 6000
