SOMFY Animeo 1870452 Manual Download | Manualshive

Page: 4 / 56

background image

animeo KNX 4 DC Motor Controller

28.02.2019

WM 24 V DC



2019 Somfy Activités SA



Ref. 5147817A

4/56

1 Definitions

1.1 Manual Command

A manual command is a command which is generated by local conventional push buttons or by a Somfy
RTS radio hand transmitter. A telegram which is sent on the objects 1-12 (bit commands) is also understood
as a manual command.

1.2 Automatic Command

A telegram which is sent on the objects 13-20 (byte commands) is understood as an automatic command.

1.3 US push button ergonomics

With this parameter it is ensured that the Venetian blind is controlled in the US ergonomics over the local
push button inputs or over the Somfy RTS radio hand transmitter.
Short pressing of the push button (< 0.5 s): A move command is carried out.
Long pressing of the push button (> 0.5 s): A turn command is carried out, as long as the push button is
pressed. When released, the turn command is stopped.
If the current position of the Venetian blind is beyond the turn, a move command is carried out with pressed
push button.

1.4 EU push button ergonomics

With this parameter it is ensured that the Venetian blind is controlled in the EU ergonomics over the local
push button inputs or over the Somfy RTS radio hand transmitter.
Short pressing of the push button (< 0.5 s): A turn step is carried out.
Long pressing of the push button (> 0.5 s): A turn command is carried out as long as the push button is
pressed.
If the current position of the Venetian blind is beyond the turn, a move command is carried out.

1.5 Screen push button ergonomics

With this parameter it is ensured that the end product is controlled in screen ergonomics over the local push
button inputs or over the Somfy RTS radio hand transmitter.
Short pressing of the push button when the end product is moving: A stop command is carried out.
Long pressing of the push button when the end product is not moving: A drive command is carried out.

1.6 On/Off/Toggle

1.6.1 On

If an “On” telegram is generated the value “1” is transmitted on the corresponding KNX group address.

1.6.2 Off

If an “Off” telegram is generated the value “0” is transmitted on the corresponding KNX group address.

1.6.3 Toggle

If a “Toggle” telegram is generated the value is firstly inverted and then transmitted to the corresponding
KNX group address.

«
...
2
3
4
5
6
...
»

Summary of Contents for Animeo 1870452

























































Reviews:

No comments

Related manuals for Animeo 1870452

Concord express

Brand: GE Pages: 3

Brand: Saitek Pages: 44

Brand: Danfoss Pages: 16

Brand: Danfoss Pages: 20

Brand: Daktronics Pages: 5

Brand: Daikin Pages: 12

Brand: H3C Pages: 69

Brand: Fagor Pages: 10

Brand: Fagor Pages: 358

Brand: Fagor Pages: 556

Brand: Fagor Pages: 172

Brand: Fagor Pages: 180

Brand: Fagor Pages: 112

Master Control Unit

Brand: FaderMate Pages: 36

Brand: VAT Pages: 26

Brand: Gardner Denver Pages: 22

Brand: B&G Pages: 2

FOUNDATION 3730-5

Brand: Samson Pages: 132

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands