manualshive.com logo in svg

SOMFY Animeo 1870452, Manual

Share
Download
SOMFY Animeo 1870452 Manual Download Page 33

 

animeo KNX 4 DC Motor Controller 

28.02.2019 

 

WM 24 V DC 

 
 

 2019 Somfy Activités SA 

 Ref. 5147817A 

33/56 

•

 

Rising Off 

If a rising flank at the local input appears, the object value “Off” is generated. If a falling flank at the local in-
put appears, this is not evaluated. The duration of the activity is not evaluated. 
 

•

 

Falling Off 

If a falling flank at the local input appears, the object value “Off” is generated. If a rising flank at the local in-
put appears, this is not evaluated. The duration of the activity is not evaluated. 
 

•

 

Rising toggle 

If a rising flank at the local input appears, the object value is inverted. If a falling flank at the local input 
appears, this is not evaluated. The duration of the activity is not evaluated. 
 

•

 

Falling toggle 

If a falling flank at the local input appears, the object value is inverted. If a rising flank at the local input 
appears, this is not evaluated. The duration of the activity is not evaluated. 
 

•

 

Rising toggle, falling toggle 

If a rising or falling flank at the local input appears, the object value is inverted. The duration of the activity is 
not evaluated. 
 

•

 

No evaluation 

If a rising or falling flank at the local input appears, this is not evaluated. 
 

6.6.3  Edge evaluation contact B 

For detailed information see Edge evaluation contact A. 
 

6.6.4  Send starting value on Bus power return 

Default value: 

  No 

Selection options:  

  Yes  

 

  No 

 
If this parameter is stopped, the current state of the input is transmitted with the bus voltage return. If this 
parameter is set to “No”, the current state of the input is not transmitted. 
 

6.6.5  Contact A and B Cyclic sending of status 

Default value: 

  No cyclic sending 

Selection options: 

  No cyclic sending 

 

  On 

 

  Off 

 

  On and Off 

 
With this parameter it is defined whether the corresponding switch value of the communication object should 
be transmitted cyclically. 
 

•

 

No cyclic sending 

The switching value of the communication object is not transmitted cyclically. 
 

•

 

On 

If the object value is “1”, this is transmitted cyclically. If the object value changes by flank change at the local 
input or reception of a telegram on “0”, the cyclic sending stops. 
 

•

 

Off 

If the object value is “0”, this is transmitted cyclically. If the object value changes by flank change at the local 
input or reception of a telegram on “0”, the cyclic sending stops after “1”. 
 
 

 

Summary of Contents for Animeo 1870452

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands