manualshive.com logo in svg

SOMFY Animeo 1870452, Manual

Share
Download
SOMFY Animeo 1870452 Manual Download Page 14

 

animeo KNX 4 DC Motor Controller 

28.02.2019 

 

WM 24 V DC 

 
 

 2019 Somfy Activités SA 

 Ref. 5147817A 

14/56 

No.  Object name 

Type 

DPT_ID  Description 

43 

Motor 4 Security, low prio 

1 bit 

1.001 

further move commands will be blocked. With the 
receiving of a telegram with the value 

“0” on one 

of these communication objects, the security is 
turned off and move commands will be accepted 
again. If 

“Repeat last telegram after security 

(Yes)

” has been selected in the ETS parameters, 

the blind moves to the position it was, before 
security was activated.  
If on one of the communication objects 45-48 
(Security, high prio) a telegram is received with 
the value 

“1”, the corresponding blind moves to 

the position parameterized in the ETS (Security, 
high prio). 

44 

Motor 1-4 Security, low prio 

1 bit 

1.001 

If a telegram with the value 

“1” is received on this 

communication object, the blinds 1-4 move to the 
position parameterized in the ETS parameters 
(Security, low prio) and any further move com-
mands will be blocked. With the receiving of a tel-
egram with the value 

“0” on this communication 

objects, the security is turned off and move com-
mands will be accepted again. If 

“Repeat last tel-

egram after security (Yes)

” has been selected in 

the ETS parameters, the blinds move to the posi-
tion they have been before security was acti-
vated.  
If on the communication object 49 (Security, high 
prio) a telegram is received with the value 

“1”, the 

blinds 1-4 move to the position parameterized in 
the ETS (Security, high prio). 

45 

Motor 1 Security, high prio 

1 bit 

1.001 

If a telegram with the value 

“1” is received on one 

of these communication objects, the correspond-
ing blind moves to the position parameterized in 
the ETS parameters (Security, high prio) and any 
further move commands will be blocked. With the 
receiving of a telegram with the value 

“0” on one 

of these communication objects, the security is 
turned off and move commands will be accepted 
again, if the corresponding object 40-43 (Secu-
rity, low prio) has the value “0”. Otherwise the 
parameterized action for low security will be 
carried out. When 

“Repeat last telegram after 

security (Yes)

” has been selected in the ETS 

parameters and both securities for the corre-
sponding channel have the value “0”, the blind 
moves to the position it was, before any security 
was activated. 

46 

Motor 2 Security, high prio 

1 bit 

1.001 

47 

Motor 3 Security, high prio 

1 bit 

1.001 

48 

Motor 4 Security, high prio 

1 bit 

1.001 

Summary of Contents for Animeo 1870452

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands