animeo KNX 4 DC Motor Controller
28.02.2019
WM 24 V DC
2019 Somfy Activités SA
Ref. 5147817A
36/56
•
On/Off
With a short pressing of the push button at the input A, an “Off” telegram is generated. With a short activity of
the corresponding push button at the input B, an “On” telegram is generated. This function can be inverted
by changing over the clamps at the inputs.
•
Toggle/Toggle
Switching over can be done with a short pressing of the push button at the input A or B. This means that the
value which is in the corresponding switching object is firstly inverted and is then transmitted.
H
See chapter 1 Definitions
for On (“1”) Off (“0”) Toggle (“1/0”).
6.8.4 Contact type input A
Default value:
Normally open
Selection options:
Normally open
Normally closed
With this parameter it is defined which contact type is at the corresponding local input.
Normally open: The contact at the local input is activated closed and not activated open.
Normally closed: The contact at the local input is activated open and not activated closed.
6.8.5 Contact type input B
Default value:
Normally open
Selection options:
Normally open
Normally closed
With this parameter it is defined which contact type is at the corresponding local input.
Normally open: The contact at the local input is activated closed and not activated open.
Normally closed: The contact at the local input is activated open and not activated closed.
6.8.6 Dimming with
Default value:
Stop telegram
Selection options:
Cyclic intervals
Stop telegram
•
Cyclic intervals
With a short pressing of the push button at the local i
nput A or B, an “On” or an “Off” telegram is generated
over the corresponding object (1 bit). With a long pressing of the push button at the local input A brighter
dimming is done over the corresponding object (4 bit) as long as the push button is pressed. When the push
button is released on the local input A cyclical sending is stopped. The length of steps and the time duration
for brighter dimming is made from the parameters “longer push button pressing (dimming)” and “interval for
cyclical dimming”.
With a long pressing of the push button at the local input B, darker dimming is done over the corresponding
object (4 bit) as long as the push button is pressed. When the push button is released on the local input B,
cyclical sending is stopped. The length of steps and the time duration for darker dimming is made from the
parameters “longer push button pressing (dimming)” and “interval for cyclical dimming”.
•
Stop telegram
With a short pressing of the push button at the local input A or B, a telegram is generated over the corre-
sponding object (1 bit). With a long pressing of the push button at the local input A brighter dimming is done
over the corresponding object (4 bit). With a long pressing of the push button at the local input B, darker dim-
ming is done over the corresponding object (4 bit). When the corresponding push button at the local input A
or B is released, a stop command is generated.