Smiths Graseby 3200 Technical & Service Manual Download Page 18

Page: 18 / 117

Smiths Medical International Ltd.

Issue 5 (August 2004)

3200 Service Manual

1 — 3

Features

The key features of the 3200 are as follows:
•

In-line (wet-side) pressure sensing,

•

automatic syringe size sensing,

•

up to 1500 History events storage,

•

universal AC supply powered or battery powered,

•

can be Configured to work with a range of syringe brands,

•

advanced safety features,

•

state-of-the-art electronics,

•

clear text display,

•

comprehensive range of alarms,

•

RS232 interface,

•

simple to use and service,

•

all materials used in this product are latex free.

The pump makes use of a sophisticated micro-controller which combines microprocessor
facilities with the following:
•

0n-board non-volatile memory,

•

RAM,

•

ROM,

•

an analogue-to-digital converter,

•

communications circuitry,

•

four 8-bit pulse-width modulated outputs,

•

an internal watchdog (COP).

These facilities are usually provided by many separate silicon chips, the use of a single
micro-controller greatly increases the pump’s reliability.

Micro-
controller

Features

Summary of Contents for Graseby 3200






















































































































Search results

Summary of Contents for Graseby 3200

Reviews:

Related manuals for Graseby 3200

Brands by name

Popular brands

Smiths Graseby 3200, Technical & Service Manual

Search results

Summary of Contents for Graseby 3200

Reviews:

Related manuals for Graseby 3200

Brands by name

Popular brands